通風管道特點及安裝事項

發布人：http://m.lessonsfromyesterday.com   發布時間：2018-04-18 17:24:16

通風管道安裝為了減少投資，節省空間，降低層高，有些敷設無坡度要求的管道，可以穿梁敷設(如自來水管道，消防噴 灑干管等，對于比較復雜的民用建筑，在設計階段，各工種(暖通、給水排水，供電照明與建筑)應協商好空 間分隔，定出每種管道的標高范圍。一般情況下不得越出給自己規定的界限，遇有個別管段要越界時應與其他工程協商。施工前應設備總管的工程師，將各工種的管線，單線畫在一張平面圖上，每種管道用一種彩色筆。濟南通風管道安裝人員提醒在各交點處綜合其標高，看是否有矛盾之處，及時發現將問題解決在安裝之前。解決各種通風管道相碰及協調的原則，一般為：“小管讓大管，有壓讓無壓”。例如，自來水管與風管相 撞，則應當自來水管拐彎。冷、熱水管與下水管相碰，則應改變冷、熱水管道。

In order to reduce investment, save space and reduce storey height, some pipes are laid without slope requirements. They can be laid by beams (such as water pipes, fire sprinkler pipes and so on. For more complex civil buildings, at the design stage, all types of work (HVAC, water supply and drainage, power supply lighting and Architecture) should be first required. Negotiate the space partition and determine the elevation range of each pipeline. The general case not set himself out of bounds, in a period of leave to cross should consult with other engineering. Before construction, the engineer of equipment and main pipe should be drawn on a floor plan for each type of pipeline and single line, and one color pen will be used for each pipeline. Ji'nan ventilation pipe installation personnel remind them to synthesize their elevation at each intersection point to see if there is any contradiction, and find out the problem before installation. To solve all kinds of ventilation pipe collide and coordination principle, generally: "let the pressure get tubular bassoon, no pressure". For example, if the water pipe collides with the air pipe, it should turn the water pipe. The cold and hot water pipes and water pipes together, should change the cold and hot water pipe.

通風管道產品的特點設計靈活，通風管道可根據預留洞的大小，隨時調整管道的規格尺寸，造價低使通風管道與傳統磚砌通風道比，能節約工程造價40%左右，防火性能好：當前普遍存在的問題是成品通風道燃燒性能和耐火極限未經有關部門檢測，且部分通風 道材料的燃燒性能、管壁厚度不符合要求。輕質高強與傳統磚砌通風道比，菱鎂通風道自重輕、強度高，能大幅度降低建筑物的承受荷載，設計獨特的通風管道的開口上安裝了煙氣止回閥和防火隔離門，可以有效防止串味和串火，施工簡單增加了室內空間，密閉性好、不返煙、不返臭，能大幅度改善室內環境。

The characteristic design of the ventilation pipe product is flexible. The ventilation pipe can adjust the size of the pipeline at any time according to the size of the reserved hole. The low cost makes the ventilation pipe and the traditional brick masonry air duct compare, which can save about 40% of the project cost and good fire resistance performance: the current common problem is the combustion performance and the fire resistance limit of the finished product ventilator. It has not been detected by the relevant departments of the state, and the combustion performance and the thickness of the pipe wall of some ventilation ducts do not meet the requirements. The light weight and high strength and the traditional brick masonry air duct, the magnesite ventilation Road with light weight and high strength, can greatly reduce the bearing load of the building. The smoke check valve and fire isolation gate are installed on the opening of the unique ventilation pipe, which can effectively prevent the series of smell and series of fire. No smoking or no smell can greatly improve indoor environment.

另外通風設備在啟動時要注意的幾個方面，啟動前應將風機進口調節風門嚴禁關閉，防止操作錯誤，帶負載啟動，注意啟動的時間以及空載電流是否正常，檢查軸承的潤滑油位是否正常、冷卻水管供水情況、聯軸器是否完好、檢修孔門是否封閉。

In addition, some aspects should be paid attention to when the ventilation equipment is started. Before starting, the fan inlet regulating valve should be strictly forbidden to shut down, prevent the operation error, start with the load, pay attention to the start time and the normal current, check whether the lubricating oil level of the bearing is normal, the water supply condition of the cooling water pipe, and the coupling is intact, The maintenance door is closed.

想了解更多關于濟南通風管道知識請關注濟南順發通風管道工程http://m.lessonsfromyesterday.com/