通風管道應用工業除塵該如何進行合理布局？

發布人：http://m.lessonsfromyesterday.com   發布時間：2021-06-25 13:57:23

　　工業除塵系統軟件管道,作為一個輔助工業生產環境的美化,合理布局的簡單和緊湊,平整美觀,安裝方便、實際操作、維護和其他因素做出合理化的管道系統軟件,然后工業除塵系統如何安排軟件管道合理嗎?

　　Industrial dust removal system software pipeline, as an auxiliary industrial production environment beautification, reasonable layout of simple and compact, flat and beautiful, easy to install, practical operation, maintenance and other factors to make reasonable pipeline system software, and then industrial dust removal system how to arrange software pipeline reasonable?

　　1.管道合理布置通用標準

　　1. General standard for reasonable pipeline layout

　　在除塵設備的揚塵風管中，其煙塵或有害物質或其他物質的特性會有所不同。須考慮不同的差異。須遵循的標準是:

　　In the dust duct of dust removal equipment, the characteristics of dust or harmful substances or other substances will be different. Different differences have to be considered. The standards to be followed are:

　　如何合理安排工業除塵通風管道?

　　How to arrange industrial dust removal ventilation pipe reasonably?

　　1.不同的煙塵蒸汽特性是不同的，所以清洗溶液應根據不同的段落而不同。

　　1. The steam characteristics of different soot are different, so the cleaning solution should be different according to different paragraphs.

　　當污染物較多時，可以集中在一個凈化設備中，也可以分為多個系統軟件。但是，空氣污染物的混合會產生著火、爆炸的危險，產生不同溫度和環境濕度的蒸汽，混合后會出現管道。其內部凝結物、煙氣和蒸汽的特性不同，危及采集和清洗的效率。

　　When there are many pollutants, they can be concentrated in one purification equipment or divided into multiple system software. However, the mixing of air pollutants will produce the danger of fire and explosion, and produce steam with different temperatures and environmental humidity. After mixing, pipes will appear. The characteristics of condensate, flue gas and steam are different, which endangers the efficiency of collection and cleaning.

　　2.管道系統軟件的合理布置應降低管道系統的摩擦阻力

　　2. The reasonable layout of pipeline system software should reduce the friction resistance of pipeline system

　　一般環形風道抗壓強度高，原材料損耗小，但室內空間大。矩形方管占據室內空間小，便于合理布置，但也要遵循室內空間條件。

　　Generally, the annular air duct has high compressive strength, small loss of raw materials, but large indoor space. Rectangular square tube occupies a small indoor space, which is convenient for reasonable layout, but it should also follow the indoor space conditions.

　　3.管道系統軟件的路面標準

　　3. Pavement standard of pipeline system software

　　管道鋪設一般有隱蔽安裝和隱蔽埋設兩種形式。一般采用隱蔽安裝，便于維護。不能隱蔽安裝的，應當考慮隱蔽埋設的方法。平行面鋪裝，管道較大或隔熱時，應合理布置在墻側。一般情況下，兩條管道的平行面布置合理時，間隔不應小于100~200mm。

　　Pipeline laying generally has two forms: concealed installation and concealed burying. Generally, concealed installation is adopted for easy maintenance. If the installation cannot be concealed, the method of concealed burying shall be considered. When parallel surface pavement, large pipeline or heat insulation, it should be reasonably arranged at the wall side. Generally, when the parallel plane of two pipelines is reasonably arranged, the interval should not be less than 100 ~ 200 mm.

　　4.管道支撐點標準

　　4. Pipe support point standard

　　該管道不適合直接支撐設備上的各種閥門。支撐架或托架應獨立安裝。管道焊接位置應在施工方便或支撐小的區域。焊接不應位于支撐架上，間隔不小于200mm。

　　The pipeline is not suitable for directly supporting various valves on the equipment. The support frame or bracket shall be installed independently. The welding position of pipeline shall be in the area with convenient construction or small support. The welding shall not be located on the support frame, and the interval shall not be less than 200 mm.

　　5.管道連接標準

　　5. Pipe connection standard

　　在以電焊為關鍵接口方式的管道中，應設置足夠的松法蘭總數，以外螺紋為主的管道連接應設置足夠的松接頭，便于安裝、拆卸、裝配和裝配。服務。

　　In the pipeline with electric welding as the key interface mode, enough loose flanges shall be set. In the pipeline connection with external thread as the main thread, enough loose joints shall be set to facilitate installation, disassembly, assembly and assembly. Services.

　　6.管道布置合理時，應保證系統整體軟件泄漏量小，并保證除塵口排氣風量充足。

　　6. When the pipeline layout is reasonable, the overall software leakage of the system should be small, and the exhaust air volume of the dust removal outlet should be sufficient.

　　2.管網系統軟件網絡布局合理

　　2. The software network layout of pipe network system is reasonable

　　為了便于管網管理方法和運行調整，管網系統軟件不宜太大。當同一系統軟件中有多個支管時，應對支管電平進行分類控制，且同一系統軟件的呼吸點不同。對于過多的防護服，須注意各隔水管工作壓力的平衡。常見的管網合理布置方式有穿管、部分穿管和環穿管三種。一般情況下，水平管的水流速率<3m/s，豎直管的水流速率<6m/s。

　　In order to facilitate the pipe network management method and operation adjustment, the pipe network system software should not be too large. When there are multiple branches in the same system software, the branch level should be classified and controlled, and the breathing points of the same system software are different. For excessive protective clothing, attention should be paid to the balance of working pressure of each riser. There are three common ways of reasonable pipe network layout: through pipe, part through pipe and ring through pipe. Generally, the flow rate of horizontal pipe is less than 3m / s, and that of vertical pipe is less than 6m / s.